LD Refill Kit for Canon PG-240 / PG-240XL Black
Canon PG-240 / PG-240XL black Inkjet refill kit includes the following:
- Two 30 ml bottles of black ink for 2 refills
- Two injection needles
- A manual, a screw tool, and a pair of plastic gloves.
Take advantage of the great savings by refilling your cartridge twice with Ink refills for your Canon PG-240 / PG-240XL!
LD inkjet cartridge refill kits allow you to refill your existing empty ink cartridge. Why buy a new or remanufactured ink cartridge when you can refill the cartridge you have for much less money? Each kit includes the ink, tools and instructions to refill your empty inkjet cartridge and get printing again quickly. It is always a good idea to refill cartridges that have just ran out of ink. You also shouldn't try to keep printing on an empty cartridge as it will burn out of the printheads on your ink cartridge. All inkjet cartridge print quality will eventually fade but by keeping your cartridge full of ink and printing regularly you should be able to get a few cycles with one cartridge before buying a new or remanufactured ink cartridge.
Canon - PIXMA
|SKU||OEM Number||Ink Type||
Page Yield is an approximation of the number of standard pages that can be printed with one cartridge, usually measured at 5% page coverage. 5% coverage is a standard 8.5 x 11 inch page with a light letterhead, address and three paragraphs of text double spaced. If you print mixed text and graphics or WebPages your page coverage is closer to 15% and therefore the number of pages printed with each cartridge will be less. If you are printing photos your page coverage is close to 100% and the number of printed photos will be much less than the amount the number of pages you would be able to print if you were just printing standard text documents.
Click anywhere to close this popup
|Cost Per Page||Capacity (ml)||Shelf Life|
|RFK004BX||5207B001||N/A||600||1.67 cents||60||24-36 Months|
Reviewed by 1 customer
Displaying review 1
Comments about LD Refill Kit for Canon PG-240 / PG-240XL Black Ink:
I have used the refill kit (black ink) for my cannon PIXMA 459 printer. It worked fine, but be patient and following the directions. Also the last instruction (number 8.) tells you to press the Stop/Reset button and hold for 10 seconds. DO IT. Also if the display window says "ink is running low" just keep using the printer. If it says "ink has run out " just press the Stop/Reset button and hold for 10 seconds, and you are back in business. Only when it is obvious that you are running out of black ink (print quality deteriorates) should you refill the cartridge. Great value as compared to remanufactured cartridges.