Printer Guides and Tips from LD Products

When should I replace my printer cartridge?

low ink warning

An “out of ink” message on your printer’s display screen is the first sign it’s time for new cartridges, but you may not have to replace them the moment your printer breaks the news. If you want to be absolutely sure your cartridges are ready for replacement, there are a few easy ways to check. Here, we show you how and offer a few tips on extending your cartridge life too so you can delay that inevitable replacement order!


Check the ink levels on your printer’s display

When in doubt, check your printer cartridge levels!  Almost every printer includes a cartridge level monitoring system on the printer display screen that tracks the remaining ink or toner.  Most cartridge levels can be found under the “maintenance” section of the display screen.  If a particular color is running low, move on to the print test below.

 


Run a print quality report

The print quality report breaks down the health of each cartridge.  When you run the test, your printer prints a color sample of each cartridge and with that, you can tell which cartridge is performing poorly.  This test can also be found under the “maintenance” section of the printer display, or it can be accessed through the software that was downloaded when you installed the printer.

 


If you own an inkjet printer, run a printhead cleaning, then try printing again

Poor test results don’t always mean you need to go out and buy new cartridges right away.   If you haven’t printed in a while, your ink may just need to be primed and a printhead cleaning will usually do the trick.  The cleaning process takes a couple of minutes.  Once it is completed, print the test page again.  If the test pattern looks solid, you are ready to print!  If the quality is still poor, let the printer sit for about 10 minutes before running a second cleaning, this allows the ink to soak on the printhead.  Keep in mind, running a cleaning on your printer will use up some ink inside the cartridge, so do not be surprised if your ink levels drop a bit after the cleaning.  Because of this, we do not recommend running a cleaning more than 1-2 times.  Multiple cleanings in a run can deplete a cartridge quickly and expedite the need for a replacement.  We walk you through the cleaning process step by step with an Epson Workforce Pro WF-3820 printer below.  These steps are similar for most printers, consult your printer’s user guide for specific  instructions for your machine.

 


If you own a laser printer, prime the cartridge, then try printing again

Most laser printers do not have an option to run a cleaning through the display screen since they use toner instead of ink, but they can be primed in a different way.  To extend the life of your toner, remove it from the printer and gently shake it back and forth a few times.  This redistributes the toner powder inside and usually gets it to print for a bit longer.  We recommend doing this over a trash can because some toner powder can escape during the process.  After you give it a few shakes, reinstall the cartridge and try printing again.

 

 


Still getting poor prints?  It may be time to replace!

If the printhead cleaning or rocking the cartridge did not work, it is likely time to replace your printer cartridge.  Printer cartridges only have about a two year shelf life in their sealed package, and a far shorter lifespan if they are sitting idle in your printer.  Most ink cartridges will dry out if they are go unused for a long period of time. Toner cartridges are a bit more forgiving, they don’t dry up like an ink cartridge and you can leave them in the printer for months in between print jobs. However, eventually some internal components will go bad and require a replacement. We recommend printing at least once every couple of weeks to keep your cartridges primed and in peak condition.

If you do end up needing new ink, LD Products offers affordable printer cartridges for thousands of popular printer models and we back every one with a Lifetime guarantee. We hope this article was helpful, let us know if you have any questions in the comments below!

Cartridge Series
Thank you for reading this post! This article is written by a team of ink experts at LD Products - a Long Beach, California-based company that specializes in compatible ink and toner.  With over 20 years of printing expertise, we’re committed to helping you save money on printer ink without sacrificing quality.  If you found this content helpful, we’d be grateful if you supported us by visiting LDProducts.com for all of your ink and toner needs.  We appreciate your support!