Brother DR730 Compatible Drum Unit (12000 Page Yield)

Black
Page Yield: 12000* Pages
Works with DCP-L2550DW, HL-L2390DW, HL-L2395DW, HL-L2370DW, HL-L2350DW, MFC-L2710DW, MFC-L2750DW printers and more!
Reg. Price $39.99 Our Price $29.99
In Stock
  • Buy 3 or more: $$28.99 each
Add to Cart

Shop highly-rated compatible Brother DR730 drum replacements that cost 70% less than an original Brother drum unit.

Our compatible Brother DR730 drum unit replacements are built to give you more affordable options than expensive Brother products. This compatible DR730 drum unit works perfectly with TN730, TN760, and TN770 toner cartridges. Performs well with original Brother and compatible toner cartridges. Drum units are sold separately from toner cartridges.

What is the difference between drum and toner?

The toner cartridge contains the toner powder, the drum unit takes this powder and fuses it onto paper to produce a print. The drum unit is where you install the toner cartridge. Your printer cannot have one without the other. Both are required to use your printer, but you may not always need to purchase both at the same time. Toner cartridges are usually the first to go and if you are getting poor print results, a new toner will likely clear up the issue. The drum unit is designed to last longer, and typically requires replacement after the use of 3 or 4 toner cartridges.

How to check DR730 drum life?

1. To check the drum life manually, press on the down arrow under the (-) sign by your printer's display until you see "Machine Info." 2. Press the OK button. 3. To scroll through the next set of options, keep pressing the down arrow until you see "Parts Life" 4. Press the OK button. 5. Press the down arrow once and it should say "Drum Life". If you don't see this, keep pressing the down arrow until you do. 6. Press the OK button. 7. The display will show you how much you have left remaining in your drum. If it says "Remaining: 0%" then it's time to replace it. Otherwise, you can keep using your drum unit. 8. It's advisable to have a replacement on hand by the time you have 10% of your drum life remaining.

How do you replace a Brother DR730 drum unit?

Since drum units last a lot longer than toner cartridges, you won't need to replace your drum unit after three or four toner replacements. When the time does come to replace your drum unit, follow these instructions or watch the video below: 1. Power on your printer and pull open the front cover. 2. Pull out the drum unit by the green handle. The toner is attached to the drum unit when you pull it out. 3. Push down on the green lever to release the toner cartridge from the drum unit. We will be transferring this toner cartridge into the new drum unit. 4. Remove packaging from your new DR730 drum unit. 5. Slide the toner cartridge from Step 3 into the new DR730 drum unit until it clicks in place. 6. Clean the corona wire towards the back end of the drum unit by sliding the green tab back and forth a couple of times. 7. Slide the drum unit back into the printer. 8. Close the front cover. 9. Now that you've replaced your drum unit, reset your drum counter. Your printer uses a page counter that must be reset manually every time a new drum unit is installed.

How do you reset the Brother DR730?

Reset instructions might differ depending on your Brother printer. To find the specific reset instructions for your printer, refer to the links below. 1. Make sure the printer is on and the front cover is closed. 2. Press down the OK button and the up arrow button at the same time for a full second. The printer display should say "Drum". 3. Press the OK button. 4. The display should say "Reset Drum?. 5. Press the OK button. Next, press the down arrow button to select the Reset option. 6. The display will say "Accepted". At this point, you're ready to print! Printer-specific drum reset instructions: Brother MFC-L2710DW | Brother MFC-L2750DW | Brother HL-L2350DW | Brother HL-L2370DW | Brother HL-L2390DW | Brother HL-L2395DW | Brother DCP-L2550DW Product Details. Our compatible Brother DR730 laser drum unit is professionally designed to produce the highest quality printouts for your Brother laser printer, meeting or exceeding OEM (Original Equipment Manufacturer) standards. Carefully constructed and put through a rigorous quality control test, our compatible replacement DR730 is the best value laser drum. Why buy expensive OEM Brother DR730 laser drum units when our replacement compatible Brother DR730 laser drum units are guaranteed to deliver excellent, dependable results, page after page? You can depend on our compatible Brother DR730 laser drum, backed by a 100% Satisfaction Guarantee! Want to learn more about the difference between a toner cartridge and a drum unit? Check out our in-depth guide. We put together a guide on how to install a Brother TN730 toner cartridge too!

Specifications

More Information
Product Type Imaging Drum
OEM Number DR730
Page Yield 12000
Cost Per Page 0.00 cents
Shelf Life 24-36 months
Ink Color Black
Brand Name Brother
Printer Brand Brother
*Average cartridge page yield in accordance with ISO-19752.